Plastic Recycling Machine/Foam Recycling Machine/Foam Cold Press Machine

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: SL-300/400
• Material Processed: Foam
• Plastic Type: EPS
• Screw: Single-Screw
• Automation: Automation
• Computerized: Computerized
• Certification: CE
• Raw Material: EPS/EPE
• Power: 11kw/15kw/22kw
• Model: SL-300/SL-400
• Capacity: 300-600kg/Hour
• Transport Package: by Sea
• Specification: 300-600KG/HOUR
• Trademark: Shuliy
• Origin: China
• Production Capacity: 300-600kg/Hour

Product Description

Foam cold press

The foam cold press is to reduce the volume of waste foam through the principle of mechanical screw extrusion, effectively solving the problems of light weight and large volume of EPS EPP EPE foam, difficult recycling and inconvenient transportation, and at the same time achieve odor-free production.


Instructions for use:

1. After the motor is installed, connect to the three live wires. After power-on, first debug the forward and reverse rotation of the motor (the position of the pulley has a correct steering sign). If the steering does not match, stop and exchange the positions of any two live wires.
2. Before starting the equipment, it needs to be filled with gear oil before it can be started normally. After starting, the material can be directly fed. The discharge port has a pressure plate that can be adjusted up and down. The pressure plate can be adjusted appropriately according to the requirements during the working period of the machine. . It can be produced normally in the future. During the production process, you should always pay attention to whether the discharging speed is uniform. If the feeding and discharging are slow, you need to adjust the pressure plate upward by about 5MM.
3. It is necessary to check the oil quantity of the gear oil and whether the screws are loose at intervals, and perform daily maintenance.