Electric Jujube Pitting Machine for Factory

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Power: 1.5KW
• Customized: Customized
• Model: Th-1
• Capacity: 150-250kg/H
• Size: 1300*1300*1450mm
• Weight: 450kg
• Mold: Depend on Date Diameter Customized
• Transport Package: Export Wooden Case
• Origin: Henan

Product Description

date pitting machine from Elva

Electric jujube pitting machine for factory

The machine can process jujube,dates, cherries, olives, etc., the output is 150-250kg/h, the machine is simple and convenient to operate, and the output is high. The mold can be customized according to the customer's raw material diameter. The machine is divided into carbon steel and 304 stainless steel.

Parameter:

model	power	capacity	size	weight	diameter
TZ-1	1.5kw	150-250kg/h	1300*1300*1450mm	450kg	14-16mm
TZ-1	1.5kw	150-250kg/h	1300*1300*1450mm	450kg	16-18mm
TZ-1	1.5kw	150-250kg/h	1300*1300*1450mm	450kg	18-20mm
TZ-1	1.5kw	150-250kg/h	1300*1300*1450mm	450kg	20-22mm
TZ-1	1.5kw	150-250kg/h	1300*1300*1450mm	450kg	22-24mm
TZ-1	1.5kw	150-250kg/h	1300*1300*1450mm	450kg	24-26mm
TZ-1	1.5kw	150-250kg/h	1300*1300*1450mm	450kg	26-28mm

This new equipment solves the problems of high manufacturing cost, low automation, low production efficiency and poor safety of the old jujube corer equipment. Since the intermittent rotation speed of the rotating disc requires a low speed and requires ground indexing, a sheave mechanism is selected. The coordinated design of the actuator is composed of a reduction gear, a transmission device, a stamping mechanism, and an intermittent motion mechanism. During feeding, the punching needle cannot be pressed to the rotating disk. Obviously, before the punching needle moves from top to bottom, the rotating disk makes an intermittent rotation. Therefore, the movement between the punching needle and the rotating disk is strictly in time sequence and spatial position. Coordination and cooperation requirements.
The design of the mechanism movement cycle diagram For the movement cycle diagram of the jujube corer, the main purpose is to determine the sequence and phase of the two executive components of the punching needle and the rotating disk, so as to facilitate the design of each executive component. The red date pitting machine works in a working cycle.